HiRO H50181 - Manual (Page 5)

5
„ Connect the USB receiver
Plug the USB receiver exactly into PC USB port.
„ To turn on laser pointer
Press “Fn” and “On/Off” button on the presenter right side simultaneously till the red
Indication LED on the front side blinks which means the laser pointer has been turned
on.
Note Laser pointer will be automatically off after laser pointer is idled over 30 minutes.
„ Indication LEDs
Red and green LED each one on presenter front with following indication function:
One red LED on USB receiver with following indication function:
Red LED blinks regularly means the product is
at PowerPoint control mode and laser pointer
is turned on.
Green LED blinks regularly means the product
is at Media Player control mode.
Note Laser pointer cannot be used at Media
Player control mode.
When Link button on USB receiver is pressed
for ID link, this red LED will light up. If correct
ID link process is conducted at presenter, this
red LED becomes regular blinking from light
up.
Note
For first use on Mac PC, you may need to do
following setting for normal use.
Plug in USB receiver → Keyboard Setup Assistant →
Click “Continue” → Identify Your Keyboard → Press
any key on the keyboard → Select “Skip” → Choose
“ANSI” → Click “Done” button