HiRO H50181 - Manual (Page 7)

7
Chapter 3 PowerPoint Control Mode – Part II (Function to use with
Fn key together)
Print on key Function description
On/Off
Press Fn and Laser On/Off keys simultaneously till the Indication LED blinking in
red to turn on or off laser pointer
Note This presenter has save power design. When laser pointer is turned on but
idled over 30 minutes, the laser pointer will be automatically off. To use the laser
function again, user shall turn on the laser pointer again
Link
ID change process below:
1. Click the Link button on the USB receiver and the red LED on the USB receiver
will light up
2. Press and hold Fn key, then press switch (Link) till the LED on the USB receiver
starts blinking which means ID change has been successfully completed
Note 1
To conduct ID change Only When serious RF interference occurs
Note 2 ID Link shall be completed in 20 seconds or needs to be conducted again
Alt + Tab
1. Press and hold Fn key, then pull down the switch (Alt + Tab) to loop among all
opened file(s)
2. Release Fn and Alt + Tab keys when looping stays at your required file
3. Use the same process to other opened file or go back to PowerPoint slide
Note
Alt + Tab function is not available on Mac OS
Left mouse
Press Fn and Left mouse button simultaneously to turn the whole screen black.
Do the same process to return to normal slide screen
Right mouse
Press Fn and Right mouse button simultaneously to turn the whole screen white.
Do the same process to return to normal slide screen