HiRO H50112 - Manual (Page 12)

12
Chapter 4 Additional Information
„ Specifications
System
Frequency range: 2400~2483MHz
(16 multi channels and 65535 ID channels)
Remote range: Approx. 100 feet (30 meters) indoors, 328 (100 meters) feet
outdoors
Operating voltage: Remote control 2.4V~3.3V, Laser 2.6V~3.3V
Power: CR2032 battery * 1
Very low power consumption: Normal operation < 5mA
Laser operation < 30mA
Sleep < 10uA
Output power: Under 1mW
Physical Dimensions
Size: 86(l) x 54(w) x 5(h) millimeters
Weight: Approx. 23 grams (with the receiver and battery)
Environmental Requirements
Temperature:
Operating:
0℃(32℉)~60℃(140℉)
Non-operation: -10℃(14℉)~65℃(149℉)
Humidity(non-condensing):
Operating:
10%~85% RH
Non-operating: 10%~95% RH
Laser
Semiconductor laser (λ= 650 nm), emission duration: continuous
Laser output power: Max. 0.95mW
Note:
Design and specifications are subject to change without notice.
„
Care and Maintenance
For cleaning, you are advised to use a soft, slightly moistened cloth.
Avoid using solvents or abrasive substances.
Do not open the presenter for maintenance, consult qualified staff only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.