HiRO H50112 - Manual (Page 9)

9
Keys in red Function How to operate
Mode
Change mode
Press Mode button, the right-hand Mode
indicator lights up and shows you the mode
you are in, press Mode button for 1 second to
change to next mode sequentially between
Presentation, Media Player, PowerDVD and
WinDVD.
Note:
Default setting in Presentation mode,
please remember to click any key and check
the mode indicator to confirm you are in the
right mode you want.
Mode
Indicator
Indicate the operation mode
No light: PowerPoint Presentation
Green light: Media Player application
Orange light: PowerDVD application
Green and Orange lights: WinDVD application
Note:
The mode indicator will light up to
identify what mode you are in while you press
any key.
Laser
Shoot the laser Press to shoot the laser beam
Slides Start slide show Click this key to start slide show.
Esc
Exit slide show Click this key to exit slide show.
Next
Go to next slide Click this key to go to next slide.
Prev.
Go to previous slide Click this key to go to previous slide.
Black
Turn the presentation screen to
black
Click this key to turn the whole screen black.
White
Turn the presentation screen to
white
Click this key to turn the whole screen white.
Link ID
To change ID
Click the “ID Link” button on the USB dongle
first, the “Link Indicator” lights up, and then
press “Fast rewind
” and “Slides” buttons
simultaneously until the Link Indictor blinks.
Note:
Implement ID change ONLY when
serious RF interference causes the remote
control malfunction.
Note:
please click any key and check the mode indicator to confirm you are on the right
mode when using. (Default setting is “Presentation Mode”)