iCreation G-501 - Manual (Page 25)

13
Connecting a Galaxy
The Bluetooth handset will connect to the last paired
Galaxy automatically when the handset is switched off
then on, and within 10 meters range. Ensure the Bluetooth
feature is enabled on the Galaxy.
If you switch off the Bluetooth feature on the Galaxy and
then switch it on, you should connect it again.
Press beneath in the standby mode. After that,
appears below on the
Galaxy screen.
Click below on the Galaxy screen. After the
connection is successful,
appears.
Cnect
Connected to phone audio G-501
Paired G-501
Connected to phone audio
Method 1: Using the Bluetooth handset
Method 2: Using the Galaxy
Call Logs
Received or Missed Calls
Press beneath .
Press to move to , then press beneath
.
Press beneath to access or
press to choose , then press beneath
. The list of incoming calls appears.
Scroll through the relevant calls list using or
until you find the desired number, press to dial it
out.
Menu
2Caller
Select
Select 1Received
2Missed
Select
The last 10 received (or missed) calls are stored in the call
logs.
1
2
3
4
24
Note:
MissCall xx appears when you miss one or more calls.
Notes:
Make sure the handset and the Galaxy are no more
than a meter apart, so they are within operable range.
If the handset is not successfully paired within 90
seconds, it will automatically leave pairing mode. If you
still want to pair, please repeat the steps of pairing
again.