INCRA Ultra 24 - Manual (Page 2)

SAFETY
Important safety instructions for using the INCRA JIG ULTRA.
Before using the INCRA JIG ULTRA, read and follow all of the
instructions and safety information in this manual.
When using INCRA JIG ULTRA in conjunction with any
other tool, first read and follow all instructions and safety
information in that tool’s owner’s manual.
When INCRA JIG ULTRA is mounted to a wooden base or
table surface, make sure that all six mounting screws are
securely tightened and the INCRA JIG ULTRA is firmly held
in place.
When using the INCRA JIG ULTRA with a wooden base,
always be sure that the base is securely clamped, screwed
or otherwise fastened to the work surface before making
a cut.
Always turn off the power and make sure that the bit or
blade is fully stationary before moving the INCRA JIG
ULTRA to any new setting.
Always keep both hands behind the fence when moving
INCRA JIG ULTRA to a new setting.
Before making a cut, always make sure that the carriage
clamp is fully engaged and the jig is securely locked in place.
When using INCRA JIG ULTRA with other tools, make sure
that all safety guards and other safety equipment supplied by
the manufacturer of that tool are securely in place and
functional. Never let INCRA JIG ULTRA interfere with
another tool’s safety equipment.
Use appropriate safety devices. Keep hands clear of the bit
or blade. Always use a push stick, rubber soled push block,
or other safety device to keep your hands safely away from
the cutting tool.
Wear safety glasses, hearing protection and follow all normal
shop safety practices.
DO NOT alter or modify the INCRA JIG ULTRA in an attempt
to use it with non-INCRA accessories.
The INCRA JIG ULTRA is designed to be used with genuine
INCRA Fence Systems only. DO NOT attempt to use the
ULTRA with other non-INCRA fence systems as this may
present a safety hazard.
INCRA JIG ULTRA
2