INCRA Miter Slider - Manual (Page 4)

INCRA MITER SLIDER OWNER’S MANUAL & JIG PLANS
Manufactured by: Taylor Design Group, Inc. P.O. BOX. 810262 Dallas, TX 75381 W W W . I N C R A . C O M
Build-It System Mounting Instructions
Before mounting your Miter Slider to a Build-It Panel, read
the instructions on the reverse side of the Build-It
Panel’s wrapper. The instructions there introduce
a few Build-It Assembly concepts and options to
consider when designing your jig’s base platform. Use
the #10-24 x 3/4” flat head Phillips screws included with
your Miter Slider hardware to attach the Miter Slider to
the line of holes on your Build-It Panel,
Fig. 12. (Small
Build-It Panel shown.) Don’t forget to adjust each of the
Miter Slider’s expansion mechanisms using the included
hex key for a good sliding fit in your application’s miter
slot. Now let’s take a look at some specific jig plans
featuring the Build-It System components.
And be sure to keep an eye on our website at:
www.incra.com for free plans for these and
other useful jigs for the many applications in
your shop.
Using Build-It Panels, rather than making your own base panel, offers some distinct advantages. First of all, they are
pre-drilled to accept the Incra Miter Sliders. No measuring, marking or drilling required. Second, the panels can be
interconnected with the Build-It System’s T-Slot Panel Connectors, making it easy to change your platform’s size at any
time while simultaneously adding the strongest T-Slot in the industry to your jig’s design. One or more of these T-Slots are
perfect for adding jig accessories to the platform, from fences, bridges and other support structures to hold downs, feather
boards and other safety features. Just connect the parts, and you can easily transition from the Build-It System assembly
shown in
Fig. 10 to the finished jig in Fig. 11 in minutes. It’s just that easy!
Large Build-It Panel (trimmed
to saw blade)
Small Build-It Panels
INCra
Miter Slider
T-Slot Panel
Connector
Fig. 10 Build-It System
Fig. 11 Finished Jig
Fig. 12 Attach Miter Slider to Build-It Panel
Cre
ate
yo
ur
o
w
n j
igs
in
m
inu
tes
. . .
Page 4
System
it
#10-24 x 3 / 4 ” Phillips screws
Small Build-It Panel
Miter Slider