INFICON Ecotec E3000 Multigas-Sniffer-Leak Detector User Manual
Page 49
6 Operation
49
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
Ecot
ec E3
000,
k
in
a
22en
1
-r
, 1
407
Fig. 37: Search for gas R134a with I•Guide program 1: The trigger value and the overall leak rate were
exceeded at measuring points 1 and 3
The next measurement cycle starts if you confirm with “OK” or press the right key on the
sniffer handle.
Changing the I•Guide
program
The new I•Guide program must be set and activated in the I•Guide settings, see above.
►
Open the list of I•Guide programs in the main menu with
and select one.
Measurement will start immediately.
Resetting the I•Guide
cycle counter
In the window “Setup I•Guide”, you can reset the I•Guide cycle counter manually with the
key “Reset counter”.
The cycle counter is always set to zero when the device is switched off.
Fig. 38: Cycle counter reset