INFICON HAPSITE Smart Plus Chemical Identification System User Manual
Page 371
11 - 11
IP
N 07
4-
47
2-
P1
C
HAPSITE Smart Plus Operating Manual
Probe . . . . . . . . . . . . . . . . . . . . . . . . The target temperature the Probe must
achieve before starting data acquisition. This
setting is not available when the Headspace
or SituProbe is enabled.
Sample Input Device
Probe . . . . . . . . . . . . . . . . . . . . . . . . The Probe is used for analyzing air samples
for volatile organic compounds.
Headspace. . . . . . . . . . . . . . . . . . . . This accessory is used for analyzing solids
and liquids for volatile organic compounds.
Additional components and their target
settings appear that are specific to the
Headspace. Refer to
.
SituProbe . . . . . . . . . . . . . . . . . . . . This accessory is used for direct analysis of
liquid samples. For example, it can be placed
directly in a flowing sample stream
(continuous monitoring). Additional
components and their target settings appear
that are specific to the SituProbe.
In selecting a method, the Probe will automatically be highlighted in the drop down
box for the Sample Input Device Options. See
Figure 11-9
.
Figure 11-9 Sample Input Device Options