Brother DCP-7055 - Manual (Page 21)

Loading paper
15
2
Acceptable paper and
other print media
2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: thin paper, plain paper, thick paper,
bond paper, recycled paper, labels or
envelopes.
For best results, follow the instructions below:
 DO NOT put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
 For correct printing, you must choose the
same paper size from your software
application as the paper in the tray.
 Avoid touching the printed surface of the
paper immediately after printing.
 Before you buy a lot of paper, test a small
quantity to make sure the paper is
suitable.
Recommended paper and
print media
2
To get the best print quality, we suggest using
the following paper.
Type and size of paper
2
The machine loads paper from the installed
standard paper tray or manual feed slot.
The name for the paper trays in the
printer driver and this Guide are as
follows:
2
Paper capacity of the paper trays
2
Paper Type Item
Plain paper APP Blue Flagship 70 g/m 2
APP Gold Flagship 80 g/m 2
Advanced Agro Double A 80 g/m
2
Tray and optional unit Name
Standard paper tray Tray 1
Manual feed slot Manual
Paper size Paper type No. of sheets
Paper Tray
(Tray 1) A4, Letter, Executive, A5,
A5 (Long Edge), A6, B5,
B6, 16K(195x270mm),
16K(184x260mm),
16K(197x273mm) Plain paper, Thin paper
and Recycled paper
up to 250 [80 g/m
2
]
Manual feed slot
(Manual) Width: 76.2 to 216 mm
Length: 116 to 406.4 mm
Plain paper, Thin paper,
Thick paper,
Thicker paper,
Bond paper,
Recycled paper,
Envelopes and Labels Single sheet
[80 g/m
2
]