Brother DCP-7055 - Manual (Page 80)

74
Machine Information
B
Checking the Serial Number
B
You can see the machine’s Serial Number on
the LCD.
a
Press Menu.
b
Press a or b to choose 3.Machine
Info..
Press OK.
c
Press a or b to choose 1.Serial No..
Press OK.
d
Press Stop/Exit.
Reset functions
B
The following reset function is available:
All Settings
You can reset all the machine’s settings back
to its default factory settings.
Brother strongly recommends you perform
this operation when you dispose of the
machine.
Note
Unplug the interface cable before you
choose All Settings.
How to reset the machine
B
a
Press Menu.
b
Press a or b to choose 1.General
Setup.
Press OK.
c
Press a or b to choose 5.Reset.
Press OK.
d
Press OK.
e
Do one of the following:
 To reset the settings, press a to
choose Reset. Then go to step f.
 To exit without making changes,
press b to choose Exit.
Then go to step g.
f
You will be asked if you want to reboot
the machine. Do one of the following:
 To reboot the machine, press a to
choos Yes.
The machine will begin the reset.
 To exit without rebooting, press b to
choose No.
Then go to step g.
g
Press Stop/Exit.