INFICON Maxtek PM-700 Plating Monitor - Manual (Page 36)

PM-700 SERIES PLATING MONITOR
28
This feature allows for very fine setting over a very broad range in a minimum
amount of time.
4.5.2 Hidden parameters
Parameters, which are not applicable to the selected mode of operation, are not
displayed. They are hidden. For example, Interval Time and Dwell Time are
applicable only when the monitor is in the Sample measurement mode. Thus
when the Sample mode is Off, these parameters are hidden. See Section 4.5
starting on page 27 to determine which parameters may be hidden and under what
conditions.
4.5.3 Descriptions
The following is a list of the available parameters, organized according to menu,
along with their type and their range.