I.R.I.S. 295 - Manual (Page 20)

APPENDIX: B
CABLING
NightRunner is supplied with a 50ft water resistant CAT5 568B Straight-Thru Cable.
WARNING!
Although CAT5 cable is utilized, NIGHTRUNNER IS NOT A NETWORK DEVICE AND MUST NEVER BE CONNECTED TO
ETHERNET EQUIPMENT SUCH AS SWITCHES, ROUTERS, PoE INJECTORS etc.
Connecting to such devices could damage the camera beyond economical repair and also damage the IRIS595 controller and any other
equipment that may be on the network.
If the supplied cable is not long enough, contact your Iris dealer for information on our cable extension kits.
If you need to shorten the cable, please ensure the correct termination polarity is observed as shown below. Remember, NightRunner
has a Straight-Thru CAT5 568B cable.
WARNING!
NEVER USE A CAT5 CROSS OVER CABLE AS THIS WILL CAUSE PERMANENT DAMAGE TO YOUR CAMERA AND IRIS595
CONTROLLER. BOTH ENDS MUST BE TERMINATED AS SHOWN BELOW:
V2.05 Iss 17-07-14: 20
PIN NUMBER WIRE COLOUR FUNCTION
1 White / Orange DATA+
2 Orange DATA-
3 White / Green DC GND
4 Blue DC+
5 White / Blue DC GND
6 Green DC+
7 White / Brown VIDEO SIGNAL
8 Brown VIDEO GND