I.R.I.S. 075 - Manual (Page 9)

Step 3: Offer the base fixing plate into position as shown above and screw into
place using self tapping screws appropriate for your install.
Step 4: Now connect the cameras power and video cables to your extension
cables and screw the ‘shell’ of the camera (containing eyeball) onto the base
fixing plate using the 3mm Hex bolts supplied.
Camera Set-Up:
After the viewing angle has been set the camera is designed to be a ‘plug and
play’ device and therefore requires no special setup, other than powering up
the camera before it is installed and checking that the position in which it will
be fixed delivers the desired field of view.
It is also advised that the cameras Infra Red (IR) LED operation is checked prior
to final install to ensure there are no objects within close proximity to the
camera that could falsely operate the IR LED’s resulting in the imaging
changing from day (Colour) to night (Mono) operation inadvertently.
Iris Innovations: IRIS106 User Guide. v1.00 072013