Jabra PRO 9450 Duo User Manual - Manual (Page 22)

23
english
JABRA PRO™ 9450, JABRA PRO™ 9450 FLEX and
JABRA PRO™ 9450 DUO
5.5 BASE KEyPAD
The Jabra PRO base keypad displays information about the headset and call status, and has controls for call
handling. From here, you can change target phone, answer an incoming call, end the current call, configure base
settings, or open an audio link to the current target phone.
8
7
5
4
3
1 2
6
1 Battery icon: indicates the current battery level.
2 Headset docking icon: indicates the headset is docked.
3 Audio link icon: indicates audio link between base and headset is
active.
4 Mute icon: indicates the headset microphone is muted.
5 Mute button: mutes/un-mutes the headset microphone.
6 Group call icon: indicates desk phone and softphone calls are
merged.
7 Phone state icon: indicates desk phone or softphone call states.
8 Phone buttons: used for desk phone and/or softphone call
handling.
5.6 BASE KEyPAD VISUAL INDICATORS
Icon Event Icon Event
battery charging Current target phone
Full battery Phone ringing
Low battery Phone on call
Very low battery Phone on hold
Headset docked Phone unplugged
Unknown headset docked Group call
Headset and base pairing
Audio link between headset
and base is active
Muted Searching for headset
5.7 BASE AUDIO INDICATORS
The base speaker is located on the bottom of the base, and plays two distinct sounds.
Incoming call ringtone
Adjust the incoming call ringtone volume using the Jabra Control Center.
1. Launch Jabra Control Center, and select either ´Desk phone´ or ´Softphone´ tab.
2. Adjust the ´base speaker ring tone level´ slider to the desired setting, and click ´Apply´.
Keypad button clicks
Tapping, double-tapping or pressing the keypad buttons will play a click sound. Adjust keypad button volume
via the Jabra Control Center. The default setting is ´off´.
1. Launch Jabra Control Center, and select either ´Desk phone´ or ´Softphone´ tab.
2. Select one of four preset keypad click settings (off, low, medium, or high), and click ´Apply´.