Jabra PRO 9450 Duo User Manual - Manual (Page 30)

31
english
JABRA PRO™ 9450, JABRA PRO™ 9450 FLEX and
JABRA PRO™ 9450 DUO
Q When I try to make a call on my desk phone, the Jabra GN1000 RHL lifts, but the call is not connected.
A Ensure the base is connected to the desk phone handset port, and not the desk phone headset port.
The Jabra GN1000 cannot be used in conjunction with a headset port.
Q Is it possible to automate calling and answering on my desk phone without using a handset lifter?
A Yes, if the desk phone has an electronic hook switch feature. Check your supplier for compatibility with your
phone, and/or consult the support area at www.jabra.com.
Q Is it possible to set up an automatic dial tone for my softphone when I undock my headset?
A Yes, the Jabra PRO 9450 can be configured to automatically get a dial tone on the target desk phone or
softphone when the headset is undocked. Automatic dial tones are configured independently for desk
phones and softphones. Desk phones are default-enabled, and softphones are default-disabled.
1. Launch Jabra Control Center, and select the ´Desk phone´ tab.
2. Select/deselect the ´Open link when headset is undocked´ setting, and then click Apply.
Q Why does my desk phone’s electronic hookswitch not work with my headset?
A Please check your specific desk phone documentation for compatibility and configuration settings.
Alternatively visit www.jabra.com/PRO9400
Q Is it possible to listen in on calls with the Jabra PRO 9450?
A The risk of unauthorized access is limited. The Jabra PRO 9450 uses 64-bit encryption.
Q What is the range on the Jabra PRO 9450?
A Jabra PRO 9450 supports a maximum range of up to 150m (base to headset). Range varies according to the
environment in which the headset is used.
Q Can I make a conference call using multiple headsets?
A Yes, the Jabra PRO base is able to pair with four headsets in total: one primary and three secondary headsets.
Q Can I turn the headset off to save power when I’m away from the base?
A Yes. Press and hold the headset multi-function button for five seconds to power the headset off. To power the
headset up again, dock the headset with the base, or press the multi-function button.
Q What is the talk time for a Jabra PRO 9450 headset?
A Approximately 8 hours for wideband talk, and approximately 10 hours for narrowband talk.
Q My headband/earhook/neckband is broken. How do I purchase another one?
A Contact your local Jabra supplier. The necessary part number can be found in the optional accessories section
of this manual.
Q Do Jabra products contain or use PCB? (polychlorinated biphenyl)
A No. Jabra products do not contain or use PCb.
Q Why do I sometimes lose audio in my headset?
A Audio is sometimes lost when touching the charging pins on the base. If this occurs:
1. Ensure your softphone call is not on hold (e.g. Skype call), or your music is not paused.
2. Restart your softphone, or PC music player.