Bel Canto Design SET 40 - Manual (Page 10)

Page 10 SET 40 Owner's Manual
Specifications
Continuous power output into 4 or 8 ohms • 37 watts
Peak power output • >70 watts
Bandwidth • -3 dB 6 Hz - 35 kHz
Class of operation • Class A single-ended 845 triode
Input level for 37 watts output • 1.5 V rms
Signal to Noise Ratio re 1 watt out • 96 dB A weighted
Distortion at 1 watt / 1 kHz • <0.1% predominantly 2nd harmonic
Damping Factor • 3 across full bandwidth
Input configuration and impedance • 100K ohm single ended RCA
Gain at 8 ohm tap • 21 dB
Power Requirement • 110-120 / 220-240 VAC; 50-60 Hz
• 400 VA
Voltage settings are made at our facility to correspond to requirements of the country in
which the product is shipped.
Size • 19.5" W x 15" D x 11" H (496 mm x 381 mm x 280 mm)
Weight • 85 lbs (39 kg)
Service
Under normal operation the fuse should not need replacing. There is one standard 1/4" x 1" fuse.
Remove the power cord before changing the fuse. Contact your dealer if assistance is needed.