Behringer XENYX 1204USB - Manual (Page 15)

Page 15 of 17
XENYX X2442USB
X2222USB / X1832USB
X1622USB / X1222USB
X1204USB / 1204USB
X2442USB
The “Big Daddy” of the USB Series is
the X2442USB with its 10 state-of-the-
art, XENYX-powered mic inputs, four
stereo channels, four Aux Sends and
four stereo Aux Returns, and our easy
to use “one knob” compressors on each
of the mono channels. Other features
available exclusive to the X2442USB
are: four subgroups for mixing
flexibility; Main Inserts (the ideal path
for connecting graphic equalizers
or compressor/limiters); and eight
Direct Outs and Sub Outs for analog
recording purposes.
No matter what your audio mixing
needs are, BEHRINGER USB Series mixers
provide the performance and features
that can take your talent to the ne level,
at a price that is sure to amaze you.
Try one on today—we have one available
in your size!
X2442USB Front Panel
Mid Frequency,
variable 100 Hz –
8 kHz
XLR mic input
with XENYX
preamp
¼" balanced/
unbalanced input
Low Cut
filter removes
unwanted infrasonics
Gain control adjusts
input signal level
Compressor knob
adjusts compression
effect on channel
High EQ ±15 dB,
centered @ 12 kHz
Mid level ±15 dB,
variable center
frequency
Low EQ ±15 dB,
centered @ 80 Hz
Aux Sends for Monitors
(1 x pre, 1 x pre/post
selectable) and FX (post)
Pan control adjusts
position of signal in
stereo image
Mute switch
removes signal
from Main Mix
Mute & Clip LEDs
Solo & Sub/
Main assignment
switches
Channel fader
adjusts signal
level in Main Mix
Stereo Aux Returns
1-4 with additional
routing options
Onboard FX processor,
16 presets, two
parameter controls
Aux Sends 1-4
with Solo switches
Phones/CTRL
Room source
mixing matrix
Main Mix
faders
Sub 1-4
(5-8) faders
12-tier VU meter with
+48 V and Power LEDs
Phones/CTRL
Room level control
Sub 1-4 (5-8)
Left/Right
assignment
switches
VU meter
mode switch