Behringer XENYX 1204USB - Manual (Page 7)

Page 7 of 17
XENYX X2442USB
X2222USB / X1832USB
X1622USB / X1222USB
X1204USB / 1204USB
X1222USB
The X1222USB ups the ante with six
mono mic inputs. These two additional
channels can also be used for stereo
line-level devices, such as keyboards or
sound modules. Building on the feature
set of the two previous models, the
X1222USB comes equipped with channel
Inserts for inputs 1-4, a stereo 7-band
graphic EQ, which can be assigned to
the main or monitor buses, and our
proprietary FBQ Feedback Detection
System. Other features include full-sized
faders for MON and FX SENDs, our XPQ 3D
stereo surround effect (creates a broader,
enhanced stereo image), and a handy
Voice Canceller function for removing
vocals from pre-recorded tapes and CDs
for “instant-karaoke” applications.
X1222USB Front Panel
XLR mic input
with XENYX
preamp
¼" balanced/
unbalanced input
Channel
Insert
Gain control
with LED
adjusts input
signal level
Low Cut filter
removes
unwanted
infrasonics
Compressor
knob adjusts
compression
effect on channel
High EQ ±15
dB, centered
@ 12 kHz
Mid EQ ±15
dB, centered @
2.5 kHz
Low EQ ±15
dB, centered
@ 80 Hz
Aux Sends
for Monitors
and FX
Pan control
adjusts position
of signal in
stereo image
Mute switch
removes signal
from Main Mix
Channel fader
adjusts signal
level in Main Mix
Mute & Clip
LEDs
XPQ 3D level
and assignment
switch
12-tier VU meter
with +48 V and
Power LEDs
Onboard FX
processor,
16 presets,
two parameter
controls
FX to Monitor
level control
Voice Canceller
switch
Phones level
control
Standby switch
mutes all
mic inputs
FX to Main
level control
Monitor Send
level fader
Main Mix
faders
USB/2-Track
Return level fader
FX Send
level fader
7-band Graphic EQ
with FBQ Feedback
Detection and
assignment switches