Jabra DRIVE - Manual (Page 7)

6
english
Jabra DrIVE
tURnInG YoUR JABRA DRIVe on AnD oFF
Slide the on/off switch to turn the speakerphone on or off .
Sleep mode and Auto OFF
When not connected to a phone, the speakerphone turns off
automatically after 10 minutes . Use the on/off switch to turn the
speakerphone on again .
On/Off
PAIRInG YoUR JABRA DRIVe WItH YoUR PHone
Jabra DrIVE is connected to a mobile phone using a procedure
called ‘pairing’ . by following a few simple steps, a phone can be
paired with the speakerphone in a matter of minutes .
1 Activate Bluetooth® on your mobile phone
Please check the manual for your mobile phone .
2 Put the speakerphone in pairing mode
When you turn on your Jabra DrIVE for the first time, the
speakerphone will automatically start up in pairing mode – i .e .
it can be detected by your phone . When the speakerphone is in
pairing mode the status light will flash rapidly blue .
3 Set your Bluetooth® phone to ‘search’ for the JABRA DRIVE
Follow your phone’s instruction guide . First make sure that
Bluetooth® is activated on your mobile phone . Then set your
phone to search for devices . This usually involves going to a ‘setup,’
‘connect’ or ‘Bluetooth®’ menu on your phone and selecting the
option to ‘search’ or ‘add’ a Bluetooth® device .*
* Phone dependent