Jabra DRIVE - Manual (Page 8)

7
english
Jabra DrIVE
4 Your phone will find the Jabra DRIVE
Your phone will find the speakerphone under the name “Jabra
DrIVE” . Your phone then asks if you want to pair with the Jabra
DrIVE . accept by pressing ‘Yes’ or ‘OK’ on the phone and/or
confirm with the passkey or PIN = 0000 (4 zeros) . Your phone will
confirm when pairing is complete .
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra DRIVE
Jabra DRIVE
OK
Passkey:
****
HANDSFREE
SELECT
Jabra DRIVE
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
If you wish to use the speakerphone with a different phone, or
if the pairing process was interrupted, you can manually set the
speakerphone to pairing mode .
Turn the speakerphone on . Press and hold the answer/end button
for approximately 5 seconds until the status light stars blinking
rapidly blue . Then repeat steps 2 . and 3 . in the above pairing
guide .
ConneCtInG WItH YoUR PHone AUtoMAtICALLY
Pairing is only needed the first time a speakerphone and phone
are used together . When the speakerphone and phone have
been paired once they will automatically connect when the
speakerphone is on and Bluetooth® is activated on the phone . The
speakerphone can be used when it is “connected” to the phone . If
the devices are paired, but do not immediately connect, tap the
answer/end button .