6 configuration – JUMO 705020 mTRON T - Analog Input Module, 4-Ch. Operating Manual User Manual
Page 38
Advertising
6 Configuration
38
Resistance Ra or Ro, Rs or Rx, Re
The overall resistance Ra + Rs + Re (or Ro + Rx) must not exceed 4000
Ω
.
Status after change of configuration
The input values before the change of configuration are not saved; the new input values are
available approx. 2 seconds after the change of configuration.
Behavior after power on
All analog inputs are initialized and start their measurements over (no statuses are saved with
power off).
Resistance transmitter
Resistance/potentiometer in 2-wire circuit
Resistance/potentiometer in 3-wire circuit
Resistance/potentiometer in 4-wire circuit
Re
Rs
Ra
E
S
A
Rx
Ro
Ro
Rx
Ro
Rx
Advertising