JUMO 705020 mTRON T - Analog Input Module, 4-Ch. Operating Manual - Manual (Page 46)

6 Configuration
46
Replacement value
The replacement value is used if the relevant signal is not available (connection to base unit
interrupted or system in "Stop" state).
Status after change of configuration
The connections are available immediately.
Behavior after power on
The connections are available immediately after system initialization.
...\NV_SR01
(Example) This is the previously selected external input.
Select the module and – in the selector
next to it on the right – the signal to con-
nect to the external input. List of modules in the system and the
relevant signals
Replacement
value Replacement value for the relevant signal (The selection On/Off is active if a signal
is assigned to the external input.)
Off Low level (0)
On High level (1)
Parameter Selection/settings Description
?