JUMO PCA3000 PC Evaluation Software - Manual (Page 22)

6 Guide
22
6.2 Reading in data
This chapter explains how you can read in and save recorder measurement
data from a CompactFlash memory card to your PC. For a faster access
during a subsequent visualization, a concept was chosen that is based on an
archive and an evaluation.
Accordingly, the archive represents the conventional paper chart deposit, the
evaluation the rolled out paper charts.
Practical experience has shown that most users initially only wish to save
(archive) their measurement data. Data are taken out of the archive and
analyzed only in the event of a fault or similar event.
Read in
data
no
yes
CF
The recorded
measurement data can
be read in via the
CompactFlash card or
the interface.
The PCA
communications
software is used for
reading in via the
interface.
(PCC).
Further important
information: see “Read
in data” on page 75.