JUMO PCA3000 PC Evaluation Software - Manual (Page 51)

51
9 Evaluation - Table area
Mark column
h Position the mouse in the column header
h Press the left mouse button
Mark row
h Position the mouse in the left column of the row (
)
h Press the left mouse button
Additional
keys With the help of the Shift key and the left mouse button you can mark a
section covering several rows or columns. The Ctrl key and the left mouse
button can be used to mark additional rows /columns.
9.3.2 The functions of the right mouse button
If you press the right mouse button (mouse pointer must be within the table
area), you will see the following dialog window.
Select
columns Using this function, individual columns of the active table can be shown or
hidden.
v “Columns” on page 44
Zoom diagram
to time period The measurements of the selected report are zoomed in the diagram to the
next displayable period and are graphically presented.
Scroll diagram
to time period If the start time of the report is not within the visible time period, for example
after zooming, then “Scroll time period” is used to shift the curves so that the
start time (or the next possible one) is in line with the left window border.
Synchronize
time period to
diagram The entry that matches the displayed measurements is searched for in the
table area and captured. The time shown at the left window border is decisive
here.