Bowe, Bell + Howell 1200 - Manual (Page 17)

Software Installation
S006970 Rev B Page 13 of 14
Step 4 Application
Install Scan Demo or Quick Scan Pro from the Sidekick Installation CD on the host PC.
If using a scanning application other than Scan Demo or Quick Scan Pro, Step 4 acts as a reminder to
install the software.
1
To install Scan Demo or Quick Scan Pro, click the Application button. The Application screen will
display.
2
Click the corresponding button for Scan Demo or Quick Scan Pro and follow the installation menus
provided.
When the installation(s) is complete, remove the Sidekick Installation CD from the host PC and reboot.
Store the Sidekick Installation CD in a safe location.
• If installing your own scanning application, remove the Sidekick Software Installation CD
! Reboot the host PC
• Insert the Scanning Application CD and follow the application’s instructions for installation
Other Scanning Applications
With VRS Connectivity
VRS is compatible with most Scanning Applications. When starting your application, you may be
requested to select a Scanner or a Scanner Source. Depending on your application connectivity (check
with your Application Reseller), select one of the following:
• Image Controls Application (VRS) - Select Scanner Source: Böwe Bell & Howell 1200 with SVRS,
Böwe Bell & Howell 1400 with SVRS, or Bell & Howell 1400u with SVRS.
• ISIS Application - Scanner Selection: Kofax VRS Scanner. This is the certified ISIS driver for this
configuration.
Do NOT select: Böwe Bell and Howell 1200, Böwe Bell and Howell 1400, or Bell + Howell 1400u
• TWAIN Application - Scanner Selection: Kofax Software VRS - TWAIN