Brother HL-1260 - Manual (Page 263)

CHAPTER 3 BEFORE WORKING WITH THE PRINTER
3–1
CHAPTER 3
BEFORE WORKING WITH THE PRINTER
SOFTWARE COMPATIBILITY
Before working with your application software, you need to set up or install
the printer driver in your software. Locate the printers that your application
software supports and install the desired printer driver. Each software
package differs in the way the printer driver is selected. Read the software
manual and follow the setup or installation procedures.
Be sure to select the printer emulation mode that matches the installed
printer driver. This printer emulates particular printer models of the
following manufacturers. Since this printer has been factory set with the
automatic emulation selection on, you may not need to select the emulation
mode. When necessary, select the appropriate printer emulation mode with
the panel switches according to the printer driver installed in your
application software. See
“CHAPTER 4 CONTROL PANEL.”
Printer Driver Emulation Mode
* HL-1660 HP LaserJet 4+
* HL-1260e HP LaserJet 4+
HL-1260 HP LaserJet 4+
HL-10h HP LaserJet 4+
HP LaserJet 4+ HP LaserJet 4+
HL-10V/DV HP LaserJet 4+
HP LaserJet III™ HP LaserJet 4+
HP LaserJet IIID™ HP LaserJet 4+
HP LaserJet Series II™ HP LaserJet 4+
HP LaserJet IID™ HP LaserJet 4+
HP LaserJet Plus™ HP LaserJet 4+
* HL-1660 (BR-Script 2) BR-Script 2
* HL-1260e (BR-Script 2) BR-Script 2
HL-1260 (BR-Script 2) BR-Script 2
PostScript
®
level 2 language printer BR-Script 2
HL-10h (BR-Script) BR-Script 2
HL-10PS/DPS BR-Script 2
HL-8PS BR-Script 2
Apple ® LaserWriter ® II NT/NTX BR-Script 2
PostScript
®
language printer BR-Script 2
* HP 7475A™ HP-GL
HP-GL™ HP-GL
* EPSON FX-850 EPSON FX-850
EPSON FX-80™ EPSON FX-850
* IBM Proprinter XL IBM Proprinter XL
IBM Proprinter ® IBM Proprinter XL