Brother HL-1260 - Manual (Page 53)

IV - 5
1.5.2 Changeover guide, jam remove cover
(1) Open the jam remove cover by hooking your finger on 2 dents ( A ).
(2) Remove the jam remove cover with its center part opened by bending the arm of the
boss both on sides ( B ) toward the front ( C ).
(3) Remove the changeover guide from the boss by bending the right hook (viewed from the
rear) of the rear cover ( D ), then remove the changeover guide ( E ).
1.6 Side Cover R
(1) Remove the side cover R by releasing the 4 hooks.
Figure 4.7
Hole
Rear cover assy
Changeover guide
Jam remove cover
Dents
Boss
D
E
B
C
A
Figure 4.8
Front
Side cover R
Hook at 4 places
Note: Before releasing the 4 hooks, remove
the paper tray.
Rear