JUMO 902930 Wtrans Transmitter RTD Temperature Probe with Wireless Data Transmission Operating Manual - Manual (Page 12)

2 Identifying the device version
12
2.4 Type designation
(1) Basic type
902930/10 Wtrans probe T01.G1
Insertion RTD temperature probe
Ambient temperature, handle: -30 to +85 °C
(2) Operating temperature in °C
x 596 -30 to +260 °C
(3) Measuring insert
x 1006 1x Pt1000 in 3-wire-circuit
(4) Tolerance class as per DIN EN 60751
x 2 Class A
(5) Sheath diameter D in mm
x 1.9 Ø 1.9 mm (particularly quick responding) stepped from Ø 4 mm
to Ø 1.9 mm, available with flat probe tip only
x 4 Ø 4 mm
x 4.5 Ø 4.5 mm
x 6 Ø 6 mm
(6) Fitting length EL in mm (EL 50 to 1000)
x 100 100 mm
x 150 150 mm
x 200 200 mm
x ... Please specify in plain text (50 mm steps)
(7) Insertion tip
x 1 Flat
x 2 Concentric, angled at 25°
x 3 Oblique, angled at 45°
(8) Transmission frequency
x 10 ISM band 868.4 MHz (Europe)
x 20 915 MHz (America, Australia, Canada and New Zealand)
(9) Process connection
x 000 None
x 103 Screw connection G 3/8
x 104 Screw connection G 1/2
x 253 Pipe screw connection G 3/8 (for sheath diameter 6 mm only)
x 254 Pipe screw connection G 1/2 (for sheath diameter 6 mm only)
x 255 Pipe screw connection G 3/4 (for sheath diameter 6 mm only)
x 263 Pipe screw connection M 10x1 (for sheath diameter 6 mm only)
x 291 Pipe screw connection 1/2-14NPT (for sheath diameter 6 mm only)
x 662 Sheet steel flange (for sheath diameter 6 mm only)
(10) Extra codes
x 000 None
x 778 Customer-specific transmission interval, factory setting 10 s
(for orders, specification in plain text between 1 to 3600 s)
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
Order code - - - - - - - - /
Order example 902930/10 - 596 - 1006 - 2 - 4 - 100 - 2 - 10 - 000 / 000