KD Scientific Adagio Control Software for Legato Series Manual - Manual (Page 31)

Adagio User Manual © 2010 KD Scientific
5619-001 Rev B
31
4.2.4.7. Inserting steps into a method
The Insert button of the toolbar (and its equivalent option within the
contextual menu of the selected step) allows you to add a new step just
before the currently selected step. This button is enabled when a step is
selected and when the total quantity of steps has not reached the predefined
limit of the selected pump model as described in 4.2.4.5.
The inserted step will have the following properties:
• Expected start flow: Same as the expected start flow of the selected
step.
• Expected end flow: Same as the expected start flow.
• Duration: Same as the selected step’s duration.
• Step linkage property: Same as the selected step’s linking property.
The following screenshots illustrate the step insertion process in both
cases (linked and not linked steps):
Inserted
Step
Case 1. Linked steps
Case 2. Steps not linked
Inserted
Step
Inserted
Step