Kinetik Blood Pressure BPM1C - Manual (Page 12)

Using your Blood Pressure Monitor
Re-measuring
If you want to measure again, just press the start button.
Leave at least three minutes between measurements to allow blood
circulation to the arm to return to normal.
Do not measure your blood pressure too many times in one session as
it may cause discomfort in the arm.
If you feel any discomfort or pain, turn the monitor off and remove
the cuff immediately.
Shut Down
Please turn the unit off after measurement if not re-measuring.
The unit has an automatic ‘switch off’ mechanism which means it will
turn off after 2 minutes if not being used.
11