Koolance AMD 64 Adapter User Manual

Page 2

Advertising
background image

Plastic Washer (with Long Screw)

Bottom Metal Nut (with Long Screw)

3

4

Ideally, the short screws with the Koolance AMD 64
Adapter kit are all that will be required to mount the
bracket. (These are standard ATX chassis screws.)

However, if the socket’s backplate is a different
design, the longer screws, plastic spacers, and nuts
may be needed to hold the bracket.

The included bracket clips are used to
mount the Cooler. Assemble the bracket by
inserting these clips into the center slider
of the CPU-300 Cooler.

Be sure to install the temperature sensor
before mounting the CPU Cooler.

The CPU-300 Cooler will use the black
tension screw, and the center hole for AMD
64 processors. (Please see the CPU-300
installation sheet for more details.)

Apply thermal paste to the CPU directly. Spread
the paste so that it evenly covers the CPU. A piece
of thick paper (such as a business card) works well
for this.

Despite the fi nal method of attachment, the
Koolance AMD 64 Adapter should utilize
the original motherboard backplate. This is
a necessary component to avoid physical
damage of the motherboard or CPU.

Short Metal Screws

CAUTION: Always use the motherboard’s original CPU socket back-
plate with the Koolance AMD 64 Adapter. This component is designed
to avoid damage to your hardware from over-extension.

!

Advertising