Koolance PSU-1000ATX-12N-R - Manual (Page 7)

5 User Manual
If your chassis has a rear PSU mounting plate, this may need slight modifi cation to
allow the PSU-1000ATX-12N rear heat exchanger to fi t properly.
Koolance systems which are physically compatible with the PSU-1000ATX-12N
include the PC3-700 series (except PC3-720) PC4-1000 series (except PC4-1020),
and PC5-1300 series. All of these chassis require removal of a hard drive bay and
minor modifi cation to the rear PSU mounting plate (or the purchase of a separate
Koolance “Chassis PSU Mounting Plate”, if compatible).
CAUTION: The PSU-1000ATX-12N must
be mounted in one of the “CORRECT”
orientations illustrated below. Other
directions will not allow the pump to
circulate coolant properly, or coolant will
not fully submerge internal heat sources.
!
Preparation for Installation
CORRECT PSU Direction
UP
INCORRECT Direction
INCORRECT Direction
Default PSU Plate (User Modifi cation Needed) Koolance Optional Pre-Modifi ed PSU Plate
CORRECT Direction
UP
UP
UP