Koolance PSU-1300ATX-12N User Manual

Page 2

Advertising
background image

Koolance PSU-1300ATX-12N Power Supply

(Addendum 1.0)

If shutting-down the power supply
using the rear illuminated power
switch, it may become necessary
to reset the unit before it can be
powered-up again.

To do this, turn the AC power switch
to the “Off” position. Then, unplug
the main AC power cable from the PSU-1300ATX-12. Wait approximately
20-30 seconds until the green “DC” indicator light stops blinking. Then
reconnect the AC cable and move the power switch to the “On” position.

DO NOT ATTEMPT TO OPEN THE BOTTOM NOZZLE SOCKETS!
Doing so will release the internal coolant and void the product warranty.

DC indicator light

AC Power Switch

Protective Nozzle Inserts (Remove)

Your Koolance PSU-1300ATX-12N power supply may arrive with
rubber inserts to protect the top nozzle connections during shipping.
These should be removed before inserting your desired nozzles.

The user manual may have been updated since this copy was
printed. Please check the Koolance website at www.koolance.com/
support for the latest product manuals.

Advertising