Koolance PSU-1300ATX-12N - Manual (Page 7)

5
User Manual
CORRECT PSU Direction
If your chassis has a rear PSU mounting plate, this may need slight modifi cation to
allow the PSU-1300ATX-12N rear heat exchanger to fi t properly.
Koolance systems which are physically compatible with the PSU-1300ATX-12N
include the PC3-724, PC3-725, PC3-726, PC3-736, PC4-1024, PC4-1025, PC4-
1026, and PC4-1036. All of these chassis require removal of a hard drive bay and
minor modifi cation to the rear PSU mounting plate (or the purchase of a separate
Koolance PSU-1300ATX-12N “Chassis PSU Mounting Plate”, if compatible). Note
that for thermal purposes, Koolance recommends using at least a PC4 when also
used to liquid cool the PSU-1300ATX-12N.
CAUTION: The PSU-1300ATX-12N must be mounted in an upright
direction. Other orientations will not allow the pump to circulate coolant
properly, or coolant will not fully submerge internal heat sources.
!
CAUTION: The PSU-1300ATX-12N power supply is not a self-
dissipating product and must be connected to an existing liquid cooling
system (not included). The power supply will overheat and may become
permanently damaged if operated without proper cooling.
!
Preparation for Installation
INCORRECT Direction
UP
UP
INCORRECT Direction
UP
Default PSU Plate (User Modifi cation Needed) Koolance Optional Pre-Modifi ed PSU Plate