Brother HL 4040CN - Manual (Page 28)

Configuring your printer for a wireless network (For HL-4070CDW)
21
3
„ WPA-PSK/WPA2-PSK
Enables a Wi-Fi
®
Protected Access Pre-shared key (WPA-PSK/WPA2-PSK), which enables the Brother
wireless printer to associate with access points using TKIP for WPA-PSK or AES for WPA-PSK and
WPA2-PSK (WPA-Personal).
„ LEAP
Cisco
®
LEAP (Light Extensible Authentication Protocol) has been developed by Cisco Systems, Inc. which
uses user ID and password for authentication.
Encryption methods
3
Encryption is used to secure the data that is sent over the wireless network. The Brother printer supports the
following encryption methods:
„ None
No encryption method is used.
„ WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted and received with a secure key.
„ TKIP
TKIP (Temporal Key Integrity Protocol) provides per-packet key mixing a message integrity check and
rekeying mechanism.
„ AES
AES (Advanced Encryption Standard) is Wi-Fi ® authorized strong encryption standard.
„ CKIP
The original Key Integrity Protocol for LEAP by Cisco Systems, Inc.