Brother HL 4040CN - Manual (Page 59)

Wireless configuration for Windows ® using the Brother automatic installer application
52
4
Note
• If you want to setup more than WEP key1, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
r Click Next. The settings will be sent to your printer. The settings will remain unchanged if you click
Cancel.
Note
• If you want to manually enter the IP address settings of your printer, click Change IP Address and enter
the necessary IP address settings for your network.
• The control panel settings will be automatically changed to WLAN when the wireless settings are sent to
your printer.
s Follow the on-screen instructions.
„ For the users connected with a network cable for configuration:
Disconnect the network cable between your access point (hub or router) and the printer, and click
Next.