Bernina 8 SERIES V29.39.00 - Manual (Page 6)

In addition to the “automatic” mode, an extended manual mode is implemented.
This mode gives the user the opportunity to start and stop the winding process by
holding and releasing the winding button.
2.7 Winding indicator during sewing/embroidery
When closing the winder menu during winding, the clock symbol changes to the
winding symbol and allows switching back to the winding menu.
2.8 Reset of back stepping history
Lifting the presser foot when the needle is up automatically deletes the back stepping history in
memory.
6/14, 04.11.2009