KV2 Audio VHD3200 - Manual (Page 7)

FEATURES
3.1 FRONT PANEL
1) AC Mains Switch
The VHD 3200 has combination AC Mains switch/circuit breakers on the front panel. If either of
the switches shuts off during normal use, push it back to the ON position once. If it will not stay on
you should take the unit to qualified service personnel tohave it serviced.
2) Power On / Thermal
These are dual colour LED’s. When green they indicate that the Power Switch is On and that
channel of the amplifier is powered up. When red they indicate that that channel has overheated
and shut down. The unit will Auto Reset after it cools down to a safe operating temperature.
3) Signal Present
These green LED’s indicate when signal is present at the Input to that particular channel of the
amplifier.
4) Limiter
These red LED’s indicate when the audio limiter has been activated for that particular channel of
the amplifier.
3
POWER ON /
THERMAL (AUTO RESET)
SIGNAL PRESENT
LIMITER
POWER ON /
THERMAL (AUTO RESET)
SIGNAL PRESENT
LIMITER
1 2 3 4