Features, 2 rear panel – KV2 Audio VHD3200 User Manual
Page 8
FEATURES
3
3.2 REAR PANEL
1) Main Input A/B
These are the input connectors for channels A & B with associated 'Through Output' connectors for
sending signal to other devices.
2) Bridge Mode Switch
When running VHD3200 in bridge mode (bridge switch pressed), Input A serves as a bridge mode input,
bridge output (6) serves as speaker output. Input B provides phase reversed Input A signal.
3) PowerCon Power Connectors
One for each channel of the VHD3200 both must be connected to operate both channels of the
VHD3200. They accept standard PowerCon terminated AC Mains cables.
4) Fans
The cooling fans operate continuously while the VHD3200 is on. An internal temperature sensor
increases the speed of the fans during high temperature conditions. Air enters through the front grille
and exits through the rear. Be sure to allow adequate air flow to the front of the rack in which the
VHD3200 is mounted.
5) EP4 Connectors
One for each channel of the VHD3200. They accept standard EP4 terminated loudspeaker cables.
6) Bridge Mode EP4 Connector
Output channel of the VHD3200 when running in bridge mode. Accepts standard EP4 terminated
loudspeaker cables. Do not connect other speakers to speakers output A and output B in bridge mode.
AC IN
A
AC IN
B
SERIAL NUMBER
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
BRIDGE - INPUT A
INPUT
A
1600W / 4
BRIDGE
OUTPUT
A
INPUT
B
OFF
ON
3200W / 8
1600W / 4
OUTPUT
B
AC IN
A
AC IN
B
SERIAL NUMBER
WWW.KV2AUDIO.COM
DESIGNED BY KV2 AUDIO
MANUFACTURED IN THE EUROPEAN UNION
BRIDGE - INPUT A
INPUT
UT
A
1600W / 4
1
BRIDGE
OUTPUT
A
INPUT
B
OFF
ON
3200W / 8
3
1600W / 4
1
OUTPUT
UTPUT
B
1
3
4
5
6
2