Features, Rear panel page | 8 – KV2 Audio COMPEX User Manual
Page 8
Input
Balanced Female XLR connectors for connecting Left and Right
audio signal.
Output
Balanced Male XLR connectors for sending Left and Right
audio signal.
Remote bypass control
The COMPEX's bypass can be activated or deactivated by the
external switch connected by a standard Jack 1/4“. To switch
the bypass short the tip and sleeve of the jack.
Plug power connector
For connection to a standard IEC 3-pole AC connec-
tor.
Before connecting make sure that the mains voltage
corresponds to the COMPEX's voltage requirements
as stated on the unit.
Features
Rear Panel
Page | 8
OUTPUT
INPUT
R
L
R
L
REMOTE
BYPASS CONTROL
WWW.KV2AUDIO.COM
KV2 AUDIO, MANUFACTURED IN THE EUROPEAN UNION
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER OR ANY ATTACHED COMPONENTS. NO OPERATOR SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. TO REDUCE
THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
SERIAL NUMBER
230 VAC, 50/60 Hz
MAX 6WATTS
OUTPUT
R
L
INPUT
R
L
REMOTE
BYPASS CONTROL
230 VAC, 50/60 Hz
MAX 6WATTS