Tire assembly – Landoll WFPC22-36 Wing Float Pulverizer User Manual
Page 18
Advertising
2-4
F-701
ASSEMBLY
Tire Assembly
Install a Tire Assembly onto each Transport Axle Hub,
using a 1/2-20 x 1” bolt. Torque to 80-85 ft/lbs.
Leave supports under frame to support the machine in
case of weight shift while adding components.
NOTE
Block machine wheels securely so they will not roll while
working on or under it.
Figure 2-3: Tire Assembly
Hex Wheel Bolt,
1/2-20 x 1
Hex Wheel Bolt,
1/2-20 x 1
Transport Axle Hub
Wheel and Tire
Assembly
Valve Stem
Outward
Advertising
This manual is related to the following products: