Leica Biosystems PELORIS_PELORIS II - Manual (Page 67)

Protocol Setup
Leica PELORIS™ User Manual Rev K © Leica Biosystems Melbourne Pty Ltd 2011 67
Figure 39 and Figure 40 show the Edit protocol screen and describe its use.
Figure 39. Edit protocol screen
Figure 40. Configuration buttons on the Edit protocol screen
Each row represents a
protocol step
Cells in the step table show the settings for reagent,
time, temperature, pressure or vacuum (P/V), stirrer
speed, and drip time for each step.
Tap a cell to open a dialog box to change the setting.
Selected step:
tap the step number to
select a step
Protocol icon: updates
as protocol is edited
Protocol type (cannot
change)
Protocol configuration
buttons (see Figure 40
below for details)
Insert:
tap to insert a new step above the
currently selected step
Delete:
tap to remove the currently
selected step from the protocol
Name: change the protocol
name
Notes: enter a description or
other notes for the protocol
Carryover: set the carryover
value ( see 4.1.5 Carryover
Setting)
Validate/Invalidate protocol:
set the protocol as valid or invalid
( see 4.1.4 Protocol Validation)
Save: save changes made to the
protocol