Brother MFC 9560CDW - Manual (Page 150)

134
Machine Information
B
Checking the Serial Number
B
You can see the machine’s Serial Number on
the LCD.
a
Press Menu, 8, 1.
81.Serial No.
XXXXXX-XXXXXXXXX
b
Press Stop/Exit.
Reset functions
B
The following reset functions are available:
1 Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 Address & Fax
Address & Fax resets the following
settings:
 Address Book
(One Touch Dial/Speed Dial/Setup
Groups)
 Programmed fax jobs in the memory
(Polled TX, Delayed Fax)
 Station ID
(name and number)
 Coverpage Msg
(comments)
 Remote Fax Option
(Remote Access Code, Fax Storage,
Fax Forwarding, Paging and PC-Fax)
 Report settings
(Transmission Verification Report/Tel
Index List/Fax Journal)
 Setting Lock password
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.