Lenze 13.7xx Motors-Geared motors - Manual (Page 11)

Preface and general information
Legal regulations
1
l
11 BA 13.0009 − EN 2.1
1.3 Legal regulations
Labelling Nameplate Manufacturer
Lenze products are clearly labelled and defined by the
indications on the nameplates. Lenze GmbH & Co KG
Kleinantriebe
Postfach 10 13 52
D−31763 Hameln
Application as
directed Drive products
l must only be operated under the operating conditions prescribed in these instructions.
l must only be used for the purposes ordered and confirmed.
l meet the protection requirements of the EC "Low−Voltage Directive".
l are not machines in the sense of the EC Machine Directive.
l must not be operated beyond the respective capacities.
Drive systems with AC / GN / PM motors
l meet the "Electromagnetic compatibility" EC Directive if they are installed according to the specifications
of the CE−typical drive system.
l can be used:
– in public and non−public mains,
– in industrial as well as residential and commercial areas.
l The responsibility for ensuring that the application is in compliance with the EC Directive lies with the user.
Any other use shall be deemed inappropriate!
Liability l The information, data, and notes in these instructions met the state of the art at the time of printing.
Claims on modifications referring to controllers which have already been supplied cannot be derived from
the information, illustrations, and descriptions.
l The specifications, processes, and circuitry described in these Instructions are for guidance only and must
be adapted to your own specific application. Lenze does not take responsibility for the suitability of the
process and circuit proposals.
l Lenze does not accept any liability for damage and operating interference caused by:
– disregarding the Operating Instructions
– unauthorised modifications to the drive controllers
– operating errors
– improper working on and with the drive controllers
Warranty l Terms of warranty: see Sales and Delivery Conditions of Lenze GmbH & Co KG Kleinantriebe.
l Warranty claims must be made to Lenze immediately after detecting the deficiency or fault.
l The warranty is void in all cases where liability claims cannot be made.
In−house
transport l Transport the motors free of vibration.
l Avoid heavy shocks.
l If possible, use manufacturer’s packaging for transport.
Cushioned bag ensures:
– dust protection
– moisture protection
– mechanical protection
Storage
conditions l Storage:
– free of vibration
if a certain risk of vibration exists, we recommend to rotate the rotor once per week
– dry, in a non−aggressive environment
– free of dust
– free of extreme temperature changes
l Corrosion:
– Steel parts are corrosion−protected when being delivered. Do not remove the protection! Check it every
three months and, if necessary, renew it.