Mechanical installation – Lenze E82ZJ00x User Manual
Page 9
Advertising
Mechanical installation
Standard devices in the power range 0.25 ... 0.75 kW
EDK82ZJ003 DE/EN/FR 1.0
9
l
H1_MechINS−M_INST_TS_Mo_BL_751
Mounting
3.
3.
2.
1.
1.
4.
5.
E82DV_001
1. Slide on frame.
2. Insert seal.
3. Slide earthing clamps on the frame with the correct sides:
– The contact springs have to point towards the rear panel of the control cabinet.
– The cutouts of the seal specify the positions.
4. Insert 8200 vector into cutout.
5. Tighten by means of 8 screws M4x10.
– Tightening torque: 1.7 Nm (15 lb−in)
Advertising