Before you start – Lenze ECSZS000X0B User Manual
Page 10
Before you start
The Mounting Instructions
EDKCSZS000 DE/EN/FR 4.1
10
DUMMY_NUM_Reset-ECSCS000_Liefer_BL
0Fig. 0Tab. 0
The Mounting Instructions
ƒ describe how to install the ECSZS000X0B shield connection,
ƒ contain the most important technical data of the ECSZS000X0B shield connection,
ƒ are only valid in conjunction with the Operating Instructions of the axis module
ECSxA or the supply module ECSxE.
Scope of supply
ecs070
Application of the shield connection
ECSxA
ECSxE
Shield sheet
Motor cable
Mains cable or cable of external brake
resistor
z
If mains cables > 0.25 m and an
external brake resistor are used,
2 shield connections are required.
Wire clamp for
shield connection
Motor cable
Mains cable or cable of external brake
resistor
Wire clamp for
shield connection
Control cable, system bus
cable
Control cable, system bus cable
Wire clamp for
shield connection
Brake control
–