Lenze ECSZS000X0B - Manual (Page 14)

Mounting ECSxA axis module
Motor cable/Brake control
EDKCSZS000 DE/EN/FR 4.1
14

H2_MotLtg_BremsLtg_EN-ECSCS000_ECSXA_Steuerrltg_Sysbusltg_BL_EN
Motor cable/Brake control
Mounting the shield sheet
ecs077
 Insert the M6 screws into the elongated holes and attach the shield sheet
 Attach the wire clamp for the shield connection of the brake control to the shield sheet using a
3 mm Allen key
Connecting the shield of the motor cable Connecting the shield of the brake control
ecs078 ecs079
 Put the wire clamp for the shield connection
onto the motor cable and press it down.
Move it towards the axis module until the
wire clamp snaps into place.
 Press the wire clamp for the shield
connection of the brake control down using a
screw driver (3 mm blade).
Place the cable under the wire clamp.
Remove the screw driver.
 Put a cable tie around the motor cable.
Fasten the cable to the shield sheet.