1 introduction, Introduction, Introduction 1 – Lenze 3241C User Manual
Page 5: 1introduction
Advertising
Introduction
1
3
1
Introduction
This manual describes the programming interface for the on board I/O system 1000.
The L-force Controller 3241 and the I/O compound modules are connected via a
backplane bus. By means of an interface DLL (BpbDrvApi.dll), the connection of the
individual application to the backplane bus device driver (BpbDrvXp.sys) and the I/O
system is enabled.
Up to 64 I/O compound modules can be connected to the 3241 controller. Digital
input/output modules, analog modules, and counter modules are provided as I/O
compound modules. Further information can be found in the manual of the I/O
system 1000.
Advertising