Lenze IPC Operating System Windows Embedded Standard 2009 - Manual (Page 10)

Getting started
Automated Login
2
l
10 SHPWES EN 1.0
2.3 Automated Login
Automated login for the preset user (administrator) is factory set. If you wish to set an
automated login for another user, proceed as follows:
1. Start the Windows registration editor (select <Start>
à Run à "regedit").
2. In the editor, select the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\
CurrentVersion\Winlogon\
3. Enter the desired user name into key DefaultUserName.
4. The following keys must be generated as string values (<Right−click>
à New à
StringValue):
AutoAdminLogon: value 1
DefaultPassword: respective user password
When Windows Embedded Standard is restarted, an automated login is performed for the
selected user.
2.4 Change Language
The standard installation is always done in English. However, the language can be changed
to German.
How to change the language:
1. Start the Control Panel (<Start>
à Control Panel).
2. Activate the registry Languages in the dialog box Regional and language options.
3. Select the desired language in the list Language used in menus and dialogs and click
<OK>.
4. Confirm the prompt for a new system login.
5. User Log Off (<Start>
à Log Off)
6. User login.